CarRecallWatchThe 2018 Kenworth T880 has 16 safety recalls on file with NHTSA.
Owners have filed 3 complaints with NHTSA, including 2 crashes.
The most-reported problem area is Tires (2 reports).
2018 Kenworth T880 recalls
Insufficient Air Tank Volume Can Weaken Brakes
Certain Kenworth trucks were built with air tanks that do not hold enough air for the brake system.
Steering Arm Bolts May Fail, Causing Loss of Steering
Fasteners that attach the steering arm to the steering knuckle on the Dana D-Series front axle may fail.
Methane alarm may fail if power is lost, risking fire
Certain heavy-duty trucks have a wiring defect in the methane detection system.
Fuel leak from rail assembly can cause fire
A sealing washer in the high-pressure fuel rail assembly may not seat correctly in the pilot bore holes.
ABS warning light may stay off during power loss, raising crash risk
The anti-lock brake system (ABS) controller can lose battery or ignition power.
Truck May Move Unexpectedly in Cold Weather, Raising Crash Risk
Certain 2018-2020 Kenworth T680 and T880 tandem axle trucks have a parking brake on a single axle and certain automated manual transmissions.
Clutch Part May Fail, Causing Unintended Vehicle Movement
An internal component in the clutch assembly may fail on certain trucks equipped with automated manual transmissions.
Front Seat Belt Buckle May Come Apart in a Crash
Some 2018 Kenworth T680 and T880 and Peterbilt 567 and 579 trucks may have front seat belt buckle assemblies that were glued instead of sewn during manufacturing.
Trucks Missing Side Reflectors Can Be Harder to See
Certain heavy trucks built from 2013 to 2015 with side extender marker lights lack the required reflex reflectors on those extenders.
Fuel line can burst on long downhill grades
Certain trucks equipped with Cummins ISX15 or X15 diesel engines may have a fuel pump cooling circuit screen that can become restricted, particularly during driving on long downhill grades.
ABS Warning Light May Not Show Loss of Anti-Lock Braking
On certain trucks, the Anti-lock Brake System (ABS) controller can lose battery or ignition power without the dashboard ABS warning light coming on.
Gear Display May Show Neutral While Truck Is in Drive or Reverse
The gear position display on certain trucks with an Eaton UltraShift Plus or Eaton Advantage automated transmission and a right-hand stalk shifter may show the wrong gear.
Truck May Start Moving When Engine Starts in Gear
Certain transmission control software in these heavy trucks may let the engine crank briefly even when the shifter is not in neutral, which does not meet federal starter interlock requirements.
Fuel Pump Gear May Slip, Causing Engine Stalls
The fuel pump drive gear on certain diesel trucks equipped with Cummins ISX 15L engines can slip on its drive shaft.
Incorrect Air Brake Line Can Lengthen Stopping Distance
The brake control airline on certain Kenworth T800 and T880 trucks may be the wrong size.
Plastic fuel tee fittings may leak, creating fire risk
The plastic fuel tee fittings on certain heavy-duty trucks may leak fuel.
Most common 2018 Kenworth T880 problems
Problem areas named in the 3 complaints owners filed with NHTSA.
| Problem area | Reports |
|---|---|
| Tires | 2 |
| Service Brakes | 1 |
| Electronic Stability Control (Esc) | 1 |
What owners report
See attached document for complaint.
I HAVE A HANKOOK TIRE , MODEL AM15+ WITH LABELING ON THE SIDEWALL "MADE IN CHINA" THE SIZE IS 385/65R22.5 THE DOT CODE ON THE TIRE : 1BB31 53H1 3218 THIS DOT CODE IS NOT CORRECT FOR THE ABOVE TIRE. DO YOU RECALL TIRES WITH AN INCORRECT DOT CODE?*DT*JB
TL* THE CONTACT OWNED A 2018 KENWORTH T880. THE CONTACT STATED THAT WHILE DRIVING AT 30 MPH, HE DEPRESSED HIS BRAKE PEDAL AND THE BRAKE PEDAL FAILED WITHOUT WARNING. DUE TO THE FAILURE, THE CONTACT VEERED THE VEHICLE TO RIGHT OFF OF THE ROAD AND DROVE INTO A DITCH. A POLICE REPORT WAS FILED AND THE CONTACT DID NOT SUSTAIN ANY INJURIES. THE AIR BAGS DID NOT DEPLOY UPON IMPACT. THE VEHICLE WAS DESTROYED DUE TO THE ACCIDENT AND WAS TOWED TO AN INDEPENDENT TOW YARD. RECENTLY, THE CONTACT RECEIVED A RECALL NOTIFICATION FOR NHTSA CAMPAIGN NUMBER: 20V199000(ELECTRONIC STABILITY CONTROL, SERVICE BRAKES, AIR) WHICH HE LINKED TO HIS FAILURE. THE MANUFACTURER HAD YET TO BE NOTIFIED OF THE FAILURE. THE
2018 Kenworth T880 questions
Does the 2018 Kenworth T880 have any recalls?
Yes. NHTSA lists 16 safety recalls for the 2018 Kenworth T880: Insufficient Air Tank Volume Can Weaken Brakes; Steering Arm Bolts May Fail, Causing Loss of Steering; Methane alarm may fail if power is lost, risking fire; Fuel leak from rail assembly can cause fire; ABS warning light may stay off during power loss, raising crash risk. Recall repairs are normally free at an authorized dealer.
What are the most common problems with the 2018 Kenworth T880?
Based on 3 owner complaints filed with NHTSA, the most-reported problem areas are Tires (2), Service Brakes (1), Electronic Stability Control (Esc) (1).
How do I check if a recall on my 2018 Kenworth T880 has been fixed?
Enter your 17-character VIN in our VIN recall check. It shows open recalls that have not been repaired on your specific vehicle. Recall repairs are normally free at an authorized dealer.