CarRecallWatchThe 2018 Winnebago Minnie Winnie has 1 safety recall on file with NHTSA.
Owners have filed 4 complaints with NHTSA.
The most-reported problem area is Structure (2 reports).
2018 Winnebago Minnie Winnie recalls
Fire extinguisher may fail to discharge in a fire
Certain Kidde plastic-handle or push-button fire extinguishers in these motorhomes may become clogged, making them hard to activate or preventing them from discharging as expected.
Most common 2018 Winnebago Minnie Winnie problems
Problem areas named in the 4 complaints owners filed with NHTSA.
| Problem area | Reports |
|---|---|
| Structure | 2 |
| Unknown Or Other | 2 |
What owners report
Component is the RV door latch manufactured by TriMark model no. t507. The failure of this lock was that when inside the vehicle the plunger does not fully retract allowing the door to open. If you go on YouTube and search TriMark RV lock repair you will see the multiple failures of not being able to enter/exit the vehicle. In case of a vehicle fire I would not have the physical ability to find a exit. When I removed the interior of the lock there was a small broken piece of plastic. I assume this piece aided in retracting the plunger allowing the door to be open. I am greatly concerned (scared) at what harm this door latch failure could cause. I believe these latches are installed on the ma
BOTH SIDES OF MY TRAVEL TRAILER FRAME HAS DEVELOPED CRACKS WHERE A BOLT GOES THROUGH TO CONNECT A FRAME CROSS MEMBER FROM THE LEFT SIDE OF THE FRAME TO THE RIGHT SIDE OF THE FRAME NEAR THE AXLES. THE FRAME IS AN NXG MADE BY BAL/NORCO INDUSTRIES. THE CRACKS DEVELOPED OVER THE LAST 2.5 YEARS. THE TRAILER HAS LESS THAN 15,000 MILES ON IT.
THE FRAME ON BOTH SIDES OF MY TRAVEL TRAILER HAS CRACKS WHERE A BOLT GOES THROUGH TO CONNECT A FRAME CROSS MEMBER FROM THE LEFT SIDE OF THE FRAME TO THE RIGHT SIDE OF THE FRAME NEAR THE AXLES. THE FRAME IS AN NXG MADE BY BAL/NORCO INDUSTRIES. THE CRACKS DEVELOPED SOMETIME OVER THE LAST 2 YEARS. THE TRAILER HAS LESS THAN 20,000 MILES ON IT.*DT*JB*DT*JB
****NOTE - NEED MORE INFORMATION, REQUESTED THE VIN ON 4/24/2018**** BED FRAME SUPPORT FAILURE. FLIMSY CONSTRUCTION ALLOWED BED FRAME WOODEN MEMBERS TO CRACK AND CAUSE SUPPORT FAILURE. BED MATTRESS WAS BEGINNING TO CAVE THRU INTO LOWER CARGO BAY. I HAD TO REBUILD AND STRENGTHEN THE ENTIRE DESIGN FOR IT TO BE SAFE. OTHER OWNERS ARE REPORTING THE SAME PROBLEMS. THIS TRAILER WAS NEVER USED, AND THUS HAPPENED WHILE MAKING UP THE BED WITH SHEETS AND BLANKETS WHILE ON TOP OF THE MATTRESS. *TT *TR
2018 Winnebago Minnie Winnie questions
Does the 2018 Winnebago Minnie Winnie have any recalls?
Yes. NHTSA lists 1 safety recall for the 2018 Winnebago Minnie Winnie: Fire extinguisher may fail to discharge in a fire. Recall repairs are normally free at an authorized dealer.
What are the most common problems with the 2018 Winnebago Minnie Winnie?
Based on 4 owner complaints filed with NHTSA, the most-reported problem areas are Structure (2), Unknown Or Other (2).
How do I check if a recall on my 2018 Winnebago Minnie Winnie has been fixed?
Enter your 17-character VIN in our VIN recall check. It shows open recalls that have not been repaired on your specific vehicle. Recall repairs are normally free at an authorized dealer.