The 2006 Toyota Sequoia has 8 safety recalls on file with NHTSA.
Owners have filed 202 complaints with NHTSA, including 7 crashes, 4 injuries.
The most-reported problem area is Structure (46 reports).
2006 Toyota Sequoia recalls
Airbag inflator may explode and send metal fragments at occupants
Frontal airbag inflators in these vehicles were previously replaced under an earlier recall, but the replacement inflators use the same design.
Aftermarket Seat Heaters May Short Circuit and Cause Fire
Certain vehicles were equipped with aftermarket accessory seat heaters that have a copper strand heating element.
Side curtain airbags may deploy unexpectedly
Some SUVs and trucks equipped with side curtain-shield airbags have an air bag control module that may be improperly programmed.
Passenger airbag inflator may rupture, sending metal fragments at occupants
The passenger side frontal airbag inflator in these vehicles may build up excessive internal pressure when the airbag deploys, causing the inflator to rupture.
Passenger airbag inflator may rupture in crash
The front passenger airbag inflator in these vehicles can rupture when the airbag deploys in a crash.
Most common 2006 Toyota Sequoia problems
Problem areas named in the 202 complaints owners filed with NHTSA.
| Problem area | Reports |
|---|---|
| Structure | 46 |
| Air Bags | 46 |
| Electronic Stability Control (Esc) | 36 |
| Vehicle Speed Control | 21 |
| Service Brakes | 21 |
| Electrical System | 17 |
| Suspension | 15 |
| Power Train | 13 |
| Engine | 11 |
| Unknown Or Other | 11 |
What owners report
This Toyota has several large rust holes directly on the frame. i hit a pot hole and more structure damage was revealed on the frame from rust. The truck drives rough now. The vehicle only has 150,000 miles. The rust holes are so severe that they're directly under my suspension. I feel very unsafe driving this vehicle. Their was once a recall for the frame. It doesn't seem that it was satisfied. I'm very worried about this issue. Toyota should have to replace frame or make it safe to drive.
Back in 2018 toyota did the undercoat to my 2006 Toyota sequoia frame to prevent rust. Now my frame is completely rotted out to the point i canât drive my vehicle.
Frame of this vehicle has lot of rust damage, is it still under manufacture recall? How can I ensure safety of my vehicle along with rusty frame? Iâll be glad to receive more information how to contact manufacturer in order to get this resolved. I drove this vehicle on Nov 19, 2023 last time just hear some knocking sounds while driving
Frame rusted so badly the the brackets attached to it are coming off
2006 TOYOTA SEQUOIA. CONSUMER STATED THAT THE AIRBAG DID NOT DEPLOY DURING AUTO ACCIDENT. THE CONSUMER STATED THE MANUFACTURER DENIED ANY RESPONSIBILITY, STATING THAT THE VEHICLE OPERATED AS DESIGNED. THE MANUFACTURER ADVISED THE VEHICLE'S IMPACT DID NOT REQUIRE THE AIRBAGS TO DEPLOY. THE CONSUMER WAS UNSATISFIED WITH THIS RESPONSE. THE VEHICLE WAS TOTALED. THE CONSUMER REQUESTED A NEWLY REPAIRED VEHICLE AND TO BE COMPENSATED FOR FUTURE ACCIDENTS THAT MAY AFFECT THE DRIVER.
2006 Toyota Sequoia questions
Does the 2006 Toyota Sequoia have any recalls?
Yes. NHTSA lists 8 safety recalls for the 2006 Toyota Sequoia: Airbag inflator may explode and send metal fragments at occupants; Aftermarket Seat Heaters May Short Circuit and Cause Fire; Side curtain airbags may deploy unexpectedly; Passenger airbag inflator may rupture, sending metal fragments at occupants; Passenger airbag inflator may rupture in crash. Recall repairs are normally free at an authorized dealer.
What are the most common problems with the 2006 Toyota Sequoia?
Based on 202 owner complaints filed with NHTSA, the most-reported problem areas are Structure (46), Air Bags (46), Electronic Stability Control (Esc) (36).
How do I check if a recall on my 2006 Toyota Sequoia has been fixed?
Enter your 17-character VIN in our VIN recall check. It shows open recalls that have not been repaired on your specific vehicle. Recall repairs are normally free at an authorized dealer.