2004 Toyota Sequoia Recalls, Problems & Safety Rating

6 safety recalls on file

The 2004 Toyota Sequoia has 6 safety recalls on file with NHTSA.

Owners have filed 380 complaints with NHTSA, including 17 crashes, 1 fire, 19 injuries.

The most-reported problem area is Electronic Stability Control (Esc) (98 reports).

6Recalls
380Owner complaints
17Crashes reported
n/aNHTSA safety rating
Is the repair still open on your Sequoia?

A recall covers specific vehicles. Your VIN shows whether yours still needs the free repair.

2004 Toyota Sequoia recalls

Airbag inflator may explode and send metal fragments at occupants

Recall 19V741Oct 17, 2019928,220 vehicles affected

Frontal airbag inflators in these vehicles were previously replaced under an earlier recall, but the replacement inflators use the same design.

Passenger airbag inflator may explode, sending metal shards

Recall 18V883Dec 12, 2018168,993 vehicles affected

The passenger-side frontal airbag inflator in these vehicles may rupture during a crash that requires the airbag to deploy.

Passenger airbag inflator may rupture, sending metal fragments at occupants

Recall 15V285May 13, 20151,973,468 vehicles affected

The passenger side frontal airbag inflator in these vehicles may build up excessive internal pressure when the airbag deploys, causing the inflator to rupture.

Passenger airbag inflator may rupture in crash

Recall 15V286May 13, 20151,069,055 vehicles affected

The front passenger airbag inflator in these vehicles can rupture when the airbag deploys in a crash.

Suspension:Front:Control Arm:Lower Ball Joint

Recall 07V013Jan 19, 2007533,124 vehicles affected

Suspension:Front:Control Arm:Lower Ball Joint

Recall 05V225May 17, 2005768,379 vehicles affected

Most common 2004 Toyota Sequoia problems

Problem areas named in the 380 complaints owners filed with NHTSA.

Problem areaReports
Electronic Stability Control (Esc)98
Structure78
Vehicle Speed Control53
Service Brakes50
Suspension48
Service Brakes, Hydraulic42
Electrical System34
Traction Control System31
Unknown Or Other28
Air Bags24

What owners report

2026-09-06, Power Train
I own a 2004 Toyota Sequoia and have owned it since it was built by Toyota. In 2013 Toyota had a safety recall on the frame for that vehicle because in certain Northern states they are having issues with the frame rotting and braking. I brought my vehicle in May of 2013 and Carlson Toyota in Minnesota inspected. It said that it passed and they installed a corrosion kit. This vehicle has been meticulously cared for over the years and it still looks that way on the exterior and interior. I have always had this vehicle enrolled in a car wash club so it gets washed almost daily in the winter and has for its entire life. But the frame of this vehicle is to the point now where it shouldn't be driv
2026-07-01, Wheels
Description of the Safety Crash/Informed Incident: Vehicle Information: 2004 Toyota Sequoia (VIN: [XXX]) Incident Date: [XXX] Location: [XXX] Police Agency: California Highway Patrol (Report #:[XXX]) Speed at Incident: Highway speeds (~65 MPH) Description of Defect/Failure: Structural mechanical failure leading to sudden, catastrophic wheel separation at highway speeds. Nine days prior to the incident, on [XXX], the vehicle underwent a comprehensive brake, rotor, and tire rotation service at a certified Toyota dealership (Toyota of Chula Vista, Work Order #[XXX]). While traveling on the interstate, the right rear passenger wheel assembly completely detached from the moving vehicle. As a resu
2026-05-12, Structure
The contact owns a 2004 Toyota Sequoia. There was an abnormal rattling sound detected in the front area. The vehicle was shaking. No warning lights were illuminated. The vehicle was taken to an independent mechanic who determined that the frame was completely rusty and unsafe to drive. The vehicle was taken to the local dealer to have the frame checked, and it was determined there was minor rust detected. The vehicle was not repaired. The contact vehicle was taken to another local dealer, Crestmont Toyota Parts · Crestmont Toyota Service, 730 NJ-23 N, Pompton Plains, NJ 07444, who determined there was rust detected but was not repaired. The contact wrote a letter to the manufacturer. The
2025-07-28, Structure
Rust! Frame completely rusted, even though the CRC was applied back in 2013.
2025-07-17, Structure
The contact owns a 2004 Toyota Sequoia. The contact stated that while completing an inspection and emissions test on the vehicle, the mechanic informed the contact that there was severe rust on the rear subframe of the vehicle, near the control arm, and several other areas on the subframe. The contact stated that there were several holes on the subframe caused by the extreme rust. The dealer was not contacted. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 203,000.

2004 Toyota Sequoia questions

Does the 2004 Toyota Sequoia have any recalls?

Yes. NHTSA lists 6 safety recalls for the 2004 Toyota Sequoia: Airbag inflator may explode and send metal fragments at occupants; Passenger airbag inflator may explode, sending metal shards; Passenger airbag inflator may rupture, sending metal fragments at occupants; Passenger airbag inflator may rupture in crash; Suspension:Front:Control Arm:Lower Ball Joint. Recall repairs are normally free at an authorized dealer.

What are the most common problems with the 2004 Toyota Sequoia?

Based on 380 owner complaints filed with NHTSA, the most-reported problem areas are Electronic Stability Control (Esc) (98), Structure (78), Vehicle Speed Control (53).

How do I check if a recall on my 2004 Toyota Sequoia has been fixed?

Enter your 17-character VIN in our VIN recall check. It shows open recalls that have not been repaired on your specific vehicle. Recall repairs are normally free at an authorized dealer.

Other Toyota Sequoia years

Other 2004 Toyota models