The 2016 Triumph Thruxton has 2 safety recalls on file with NHTSA.
Owners have filed 21 complaints with NHTSA.
The most-reported problem area is Service Brakes (17 reports).
2016 Triumph Thruxton recalls
Side Stand Spring May Break and Stall Engine
The side stand spring on certain Triumph Thruxton motorcycles may fracture.
Engine May Stall, Raising Crash Risk
The engine can stall when the throttle is opened or closed quickly while the clutch lever is pulled in.
Most common 2016 Triumph Thruxton problems
Problem areas named in the 21 complaints owners filed with NHTSA.
| Problem area | Reports |
|---|---|
| Service Brakes | 17 |
| Exterior Lighting | 2 |
| Structure | 1 |
| Electrical System | 1 |
What owners report
the front brakes are inconsistent when engaged. the first squeeze of the brakes are spongy and almost completely squeeze down and then subsequent braking with completely clamp in 1â. The problem does not go away even after bleeding the brakes. This has occurred since ownership of over 1 year. I only came across other owners with the same issue after a google search and there is an forum thread on the issue.
The wire harness has torn under ignition. The traction control stops working, needles bounce, and at times will not start. The wire pulls when the handlebars are turned to the right. I brought it to Moto primo to have it fixed. There was a recall for this issue and they want to charge me over $700 for an issue that they are obviously aware of. I had the bike in AZ over last winter and brought it in on a different recall. Moto primo said that the dealer looked at the issue in Phoenix but did not replace the part. They told me that I have to deal with the dealer in Phoenix which is 1800 miles away. This is a very dangerous thing. The needles initially started bouncing when I was
Brakes feel spongy or grinding at times. The grip on the front brakes is not good.
The front brake requires a first 'pump' to become effective. On subsequent application the brakes work as expected. After a short time I need to 'pump' the brake again (when first applying the brakes I can almost pull the lever to the grip). This is a known problem on many owner forums. Due to the safety hazard this should really be addressed.
Very time I push the front breaks, it feel spongy. First push the leveler goes almost all way down. It becomes more firm once you push it two or three time more, however, it vanishes after that. I took it to the dealer but they said that the breaks are working good. I have also changed the break fluid and bled the system according to the maintenance schedule but it has not worked at all. I have read on Triumph groups that this has been existing problems on Thruxton and speed triple models between 2016-2020. However, Thriumph hasnât published a recall for it. It has been a serious safety problem on my bike. Fortunately, I have not had a serious accident but I had some close calls. I
2016 Triumph Thruxton questions
Does the 2016 Triumph Thruxton have any recalls?
Yes. NHTSA lists 2 safety recalls for the 2016 Triumph Thruxton: Side Stand Spring May Break and Stall Engine; Engine May Stall, Raising Crash Risk. Recall repairs are normally free at an authorized dealer.
What are the most common problems with the 2016 Triumph Thruxton?
Based on 21 owner complaints filed with NHTSA, the most-reported problem areas are Service Brakes (17), Exterior Lighting (2), Structure (1).
How do I check if a recall on my 2016 Triumph Thruxton has been fixed?
Enter your 17-character VIN in our VIN recall check. It shows open recalls that have not been repaired on your specific vehicle. Recall repairs are normally free at an authorized dealer.