The 2011 Mack CXU612 has no safety recalls on file with NHTSA.
Owners have filed 1 complaint with NHTSA.
The most-reported problem area is Structure (1 report).
0Recalls
1Owner complaints
0Crashes reported
n/aNHTSA safety rating
Is the repair still open on your CXU612?
2011 Mack CXU612 recalls
No safety recalls on file for the 2011 Mack CXU612.
Most common 2011 Mack CXU612 problems
Problem areas named in the 1 complaints owners filed with NHTSA.
| Problem area | Reports |
|---|---|
| Structure | 1 |
| Suspension | 1 |
What owners report
I AM A MAINTENANCE MECHANIC FOR A LARGE TRUCKING FIRM. ON 4 OCT 2011, I CHECKED THE TORQUE ON THE 5TH WHEEL BOLTS OF UNIT 11054 BECAUSE I COULD SEE THAT THE 5TH WHEEL WAS SLIDING ON THE FRAME. THE BOLTS WERE DEFECTIVE - YIELDING PRIOR TO REACHING THE RECOMMENDED TORQUE OF 236 FT.LB. I ADJUSTED THE TORQUE WRENCH TO 200 FT.LB., ITS LOWEST SETTING, AND COULD NOT GET ANY OF THE BOLTS TO HOLD. I REPLACED ALL TEN BOLTS WITH 5/8" GRADE 8 HARDWARE INSTEAD OF THE FACTORY 16MM 10.9 METRIC BECAUSE THAT WAS ALL WE HAD AVAILABLE. THERE WAS NO INTERFERENCE BETWEEN THE 5TH WHEEL BOLTS AND THE HUCK RIVETS ON THE FRAME RAIL. THE BOLTS WERE WEAK. *TR
2011 Mack CXU612 questions
Does the 2011 Mack CXU612 have any recalls?
No. NHTSA has no safety recalls on file for the 2011 Mack CXU612 at this time.
What are the most common problems with the 2011 Mack CXU612?
Based on 1 owner complaint filed with NHTSA, the most-reported problem areas are Structure (1), Suspension (1).
How do I check if a recall on my 2011 Mack CXU612 has been fixed?
Enter your 17-character VIN in our VIN recall check. It shows open recalls that have not been repaired on your specific vehicle. Recall repairs are normally free at an authorized dealer.